Sealer Remover
Code:   (Sealer remover)

 

Sealer Remover

Click here to Buy Now

 multi-purpose stripper formulated to remove most waterbased sealers, epoxy grout haze, urethane coatings, synthetic finishes, adhesives and paints. This product also draws out ingrained stains and removes heavy grease build-up.  
Uses

Recommended for use on both horizontal and vertical surfaces on:
♦ Ceramic Tiles
♦ Natural Stone
♦ Grout
♦ Concrete
♦ Masonary

 

 Application
1.) Read entire label before using.
2.) SHAKE WELL before using.
3.) TEST A SMALL AREA, according to application instructions, to determine desired results
4.) Sweep or vacuum surface
5.) Apply a small amount of remover to a small area of up to 2m² (25 sq. ft.), spread with a sponge or scrub brush and allow to stand for 5 to 10 minutes without drying or until coating or residue softens.  Do not allow stripper to to dry on surface.
6.) Agitate with a scrub brush.  A scrub machine may be used.
7.) Wipe up residue with a clean, absorbant white cotton towel or sponge. A wet-dry vac can be used.
8.) Rinse thoroughly with water
9.) Wipe surface dry with clean, absorbant, white towel.
10.) For removal of epoxy grout haze, dampen surface with the remover, then lightly agitate surface until haze is removed.  Rinse thoroughly with water
11.) For large commercial installations, a white pad may be used with a scrub machine.
12.) Removal of thick coatings or residue may need several applications.
Coverage
Approximately 5m² per litre bottle depending thickness of coating or amount of residue to be removed. Available in 1 and 5 litre cans

£19.99

Please contact us for more details.

0
Shopping Basket
X