Application
- Read entire label before using.
- SHAKE WELL before using.
- TEST A SMALL AREA, according to application instructions, to determine desired results
- Sweep or vacuum surface
- Apply a small amount of remover to a small area of up to 2m² (25 sq. ft.), spread with a sponge or scrub brush and allow to stand for 5 to 10 minutes without drying or until coating or residue softens. Do not allow stripper to to dry on surface.
- Agitate with a scrub brush. A scrub machine may be used.
- Wipe up residue with a clean, absorbant white cotton towel or sponge. A wet-dry vac can be used.
- Rinse thoroughly with water
- Wipe surface dry with clean, absorbant, white towel.
- For removal of epoxy grout haze, dampen surface with the remover, then lightly agitate surface until haze is removed. Rinse thoroughly with water
- For large commercial installations, a white pad may be used with a scrub machine.
- Removal of thick coatings or residue may need several applications.
