Invisible Matt finish | Gloss finish | Satin finish | Colour enhancer |
Review by the Guardian. If you want to do it yourself, go for a top-quality Travertine sealer that needs only one coat. Ultimate Sealer (£39.99 now 25% off from www.sealer-seal-sealant.co.uk, seals all Travertine.
Endorsed by the Guardian and the product of choice for most professionals, this sealer has been specially formulated as an invisible sealant for Travertine. It does not smell and provides exceptional protection against water, staining, frost and UV.
Ultimate Satin Finish, seals and leaves a sheen onto the surface of the Travertine giving extra surface protection. Satin finish may slightly enhance the colour of the Travertine and is ideal for soft surfaces such as Worktops and paving slabs. Ideal for all Travertine surfaces.
Ultimate Gloss Sealer, penetrating sealer which when dries leaves a long lasting Sheen known as a wet look finish. {AS IMAGE} . Hard wearing and easy to maintain. Apply second coat for a higher gloss shine.. Picture to the right we used 2 coats of gloss sealer..
Ultimate Colour Enhancer, Seals and delicately enhances the colour of Travertine all in one. Ideal where UV is very likely such as Patio and Paving slabs. Gives excellent waterproofing protection and leaves a non slip natural finish look.
Pre sealer cleaner is the ideal cleaner for removing grease dirt and surface sealers and waxes. {Tip ] leave the pre sealer cleaner wet after dilution on the Travertine for about 10 minutes wet, move around with a mop or soft broom then pick up the dirty water. Leave to dry then apply new sealer.
After care cleaner is recommended after the application of Travertine sealer as this cleaner is a mild alkaline cleaner that keeps the sealer protected. TIP, Do not apply after care cleaner until the sealer has been down for at least 48 hours.
REMOVES CEMENT AND MORTAR GROUT RESIDUE, LIME DEPOSIT, EFFLORESCENCE RESIDUES, AND OTHER HEAVY SOILING FROM ACID RESISTANT SURFACES. THE CLEANER FOR BOTH NEWLY LAID AND OLDER PORCELAIN TILES, QUARRY TILES, NATURAL AND ARTIFICIAL STONE. [WARNING ACID BASED] DO NOT USE ON POLISHED SURFACES. AVAILABLE IN 1 AND 5 LITRE CANS. 1 LITRE COVERS UP TO 10 SQ METRES.
non-flammable, multi-purpose stripper formulated to remove most sealers, epoxy grout haze, urethane coatings, synthetic finishes, adhesives and paints. This product also draws out ingrained stains and removes heavy grease build-up.
Uses
Recommended for use on both horizontal and vertical surfaces on:
♦ Ceramic Tiles
♦ Natural Stone
♦ Grout
♦ Concrete
♦ Masonry