Welcome to our Limestone cleaning page.
Scroll down to purchase high quality sealers and care products.
For limestone fireplace sealer click on the fireplace image.
If you require cleaning and sealing services
please visit our cleaning service page, click here.
Review by the Guardian. If you want to do it yourself, go for a top-quality Limestone sealer that needs only one coat. Ultimate Limestone Sealer (£39.99 now 25% off from www.sealer-seal-sealant.co.uk,
1 coat Ultimate Limestone Sealer,
Ultimate Satin Finish, seals and leaves a sheen onto the surface of the Limestone giving extra surface protection. Satin finish may slightly enhance the colour of the Limestone and is ideal for soft surfaces such as patio and paving slabs. Ideal for all Limestone surfaces.
Ultimate Gloss Sealer, is a penetrating sealer which when dries leaves a long lasting gloss shine known as a wet look finish. {AS IMAGE} . Hard wearing and easy to maintain. Apply second coat for a higher gloss shine.. Picture to the right we used 2 coats of gloss sealer. For a higher gloss shine apply more coats..
Ultimate Colour Enhancer, Seals and delicately enhances the colour of Limestone all in one. Ideal where UV is very likely such as Patio and Paving slabs. Gives excellent waterproofing protection and leaves a non slip natural finish look.
Pre sealer cleaner is the ideal cleaner for removing grease dirt and surface sealers and waxes. {Tip ] leave the pre sealer cleaner wet after dilution on the Limestone for about 10 minutes wet, move around with a mop or soft broom then pick up the dirty water. Leave to dry then apply new sealer.
After care cleaner is recommended after the application of Limestone sealer as this cleaner is a mild alkaline cleaner that keeps the sealer protected. TIP, Do not apply after care cleaner until the sealer has been down for at least 48 hours.
REMOVES CEMENT AND MORTAR GROUT RESIDUE, LIME DEPOSIT, EFFLORESCENCE RESIDUES, AND OTHER HEAVY SOILING FROM ACID RESISTANT SURFACES. THE CLEANER FOR BOTH NEWLY LAID AND OLDER PORCELAIN TILES, QUARRY TILES, NATURAL AND ARTIFICIAL STONE. [WARNING ACID BASED] DO NOT USE ON POLISHED SURFACES. AVAILABLE IN 1 AND 5 LITRE CANS. 1 LITRE COVERS UP TO 10 SQ METRES.
non-flammable, multi-purpose stripper formulated to remove most sealers, epoxy grout haze, urethane coatings, synthetic finishes, adhesives and paints. This product also draws out ingrained stains and removes heavy grease build-up.
Uses
Recommended for use on both horizontal and vertical surfaces on:
♦ Ceramic Tiles
♦ Natural Stone
♦ Grout
♦ Concrete
♦ Masonry
Copyright 2024
