Buy Marble Sealers and Care Products.
Please scroll down to view our sealers and care products.
If you require cleaning and sealing services please contact us.
| Invisible Matt finish | Gloss finish | Satin finish | Restoration Services | |
 |
 |
 |
 |
Review by the Guardian. If you want to do it yourself, go for a top-quality Marble sealer that needs only one coat. Ultimate Marble Sealer (£39.99 now 25% off from www.sealer-seal-sealant.co.uk, seals all Marble.
1 coat Ultimate Marble Sealer,
Ultimate Satin Finish, seals and leaves a sheen onto the surface of the Marble giving an extra surface protection. Satin finish may slightly enhance the colour of the Marble and is ideal for soft surfaces such as patio and paving slabs. Ideal for all Marble surfaces.
Ultimate Gloss Sealer, is a penetrating sealer which when dries leaves a long lasting gloss shine known as a wet look finish. {AS IMAGE} . Hard wearing and easy to maintain. Apply second coat for a higher gloss shine.. Picture to the right we used 2 coats of gloss sealer. For a higher gloss shine apply more coats..
Ultimate Colour Enhancer, Seals and delicately enhances the colour of Marble all in one. Ideal where UV is very likely such as Patio and Paving slabs. Gives excellent waterproofing protection and leaves a non slip natural finish look.
Pre sealer cleaner is the ideal cleaner for removing grease dirt and surface sealers and waxes. {Tip ] leave the pre sealer cleaner wet after dilution on the Marble for about 10 minutes wet, move around with a mop or soft broom then pick up the dirty water. Leave to dry then apply new sealer.
After care cleaner is recommended after the application of Marble sealer as this cleaner is a mild alkaline cleaner that keeps the sealer protected. TIP, Do not apply after care cleaner until the sealer has been down for at least 48 hours.
REMOVES CEMENT AND MORTAR GROUT RESIDUE, LIME DEPOSIT, EFFLORESCENCE RESIDUES, AND OTHER HEAVY SOILING FROM ACID RESISTANT SURFACES. THE CLEANER FOR BOTH NEWLY LAID AND OLDER PORCELAIN TILES, QUARRY TILES, NATURAL AND ARTIFICIAL STONE. [WARNING ACID BASED] DO NOT USE ON POLISHED SURFACES. AVAILABLE IN 1 AND 5 LITRE CANS. 1 LITRE COVERS UP TO 10 SQ METRES.
non-flammable, multi-purpose stripper formulated to remove most sealers, epoxy grout haze, urethane coatings, synthetic finishes, adhesives and paints. This product also draws out ingrained stains and removes heavy grease build-up.
Uses
Recommended for use on both horizontal and vertical surfaces on:
♦ Ceramic Tiles
♦ Natural Stone
♦ Grout
♦ Concrete
♦ Masonry
GO TO HOME PAGE
Copyright 2024
